Tuesday, 9 January 2018

Roof Sheet Making Machine





We offering finest quality Roof Sheet Making Machine to clients. its know color coated roofing sheet roll forming machine also.This is the fastest machine on the market. The newly servo drive punch simultaneously advances and punches with accuracy as the material continually moves through the machine. Not only does this considerably increase the speed of the roll forming machine, but also increases the life of the equipment tools.



D coiler 5 ton cap.

Entry Gate with

Roll Forming Line with 18 stations, 10 H.P. electrical.

Control Panel semi auto

Cutting Unit (Hydro.)

Technical Specifications



Maximum sheet width that can be formed : 1250 mm

Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm

Horizontal distance between shafts : 500mm

Number of forming stations : 16 nos.

Total HP for Line : 8

Speed of the machine : 10 -14 mt / mint

Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler



Coil weight : 5 MT Max

Coil width : 1250 MM

Coil bore : 450 MM min, 510 MM max dia.

Mandrel movement : Manually adjusted

Back Tension : Manually adjusted

Entry Gate



Entry gate will be provided for movement of sheet to roll former.



Main Base



the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.



Mill stands (Station)



The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.



Roll shafts



The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.



Drive



The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor



Tooling



One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.



Cutting Unit (Hydro)



Hydraulically operated power pack along with cutting die with 3 HP electrical.

No comments:

Post a Comment