Gypsum Board Roll Forming Machine

Gypsum Board Roll Forming Machine can roll form different type of Profile of Gypsum Board Profile without changing Roll Tolls. The thickness of Profile, height and width are adjustable and fully controlled by the computerized control Panel. All you need is just key in sizes and press the control button and then machine will automatically adjust the rollers according to your requirement. The time during adjusting roll Tools is around 2 minutes without changing and rollers. After roll formed by this Gypsum Board roll forming machine, the surface will be very smooth without any scratch. So, that is a specialty of Gypsum Board roll forming machine.

Gypsum Board Roll Forming Machine Specification
A) De coiler 1 ton cap.
B) Entry Gate with
C) Roll Forming Line with 8 stations, 1 Gear Boxes & 5 H.P. electrical.
D) Control Panel semi auto
E) Cutting Unit
  
TECHNICAL SPECIFICATIONS :- ( Plate body) (5 Profiles )
(ceiling , perimeter ,Inter , Angle , Retaining )
Maximum sheet width that can be formed : 650 mm
Maximum sheet thickness in G I Strips that can be formed : 0.8 mm
Horizontal distance between shafts : 190 mm
Number of forming stations : 8 nos.
Vertical station - : 4 nos.
Total HP for Line : 5 (ABB)
Speed of the machine : 5 mt/minute
Size of machine : 2000 x 1200 x 1100 mm

MANDREL UNCOILER
Coil weight : 1 MT Max
Coil width : 800 MM
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted

à Description of the Roll Forming Machine. (5 Profiles )
 

Entry Gate
Entry gate will be provided for movement of sheet to roll former.

Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.